Accessories

Designed for DJI Inspire 2 Remotes Mount a Focus Handwheel to the Remote Pilot the Inspire 2 & Control the Camera Adjust the Camera's Aperture...

For Inspire 2 Factory Charger Only Does Not Support Non-Factory Chargers Connects Charger with AC Power Source

For DJI Phantom/Inspire/Matrice Drones Also works with Lightbridge 2 Remotes Connects a Mobile Device to the Remote USB Type-A to USB Type-C

For DJI Phantom/Inspire/Matrice Drones Also works with Lightbridge 2 Remotes Connects a Mobile Device to the Remote USB Type-A to Micro-USB Type-B

For DJI Phantom/Inspire/Matrice Drones Also works with Lightbridge 2 Remotes Connects a Mobile Device to the Remote USB Type-A to Lightning

GPS-Based Positioning Coordinates Enables Home Points During ActiveTrack Remote Control Positioning Information

Improved Performance at 8,200-16,400 ft Increased Propulsion Force in Thin Air

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. It charges up to four Intelligent Fli...

Charges Flight Battery in 1.5 Hours Charges Controller in 2.5 Hours Requires Separate AC Cable

Set of Two Replacement Propellers

DJI CINESSD uses an NVMe logical device interface specification, features four PCI Express[1]ports and supports FAT32/exFAT[2] file formats.

Replacement Battery for Inspire 2 Quad Compatible with Ronin 2 Gimbal 4280mAh Capacity Yields up to 27 Minutes of Flight Time

The 180W Power Adapter from DJI charges your Inspire 2 remote controller and flight battery using AC power. It takes approximately 1.5 hours to...

The TB50 Intelligent Flight Battery (SKU: CP.BX.000179) produces a maximum flight time (with X4S) of approximately 27 minutes by using a higher per...

2.4 & 5.8 GHz Transmitter Lightbridge Technology Switch Between Control Frequencies Pre-Configured for Inspire 2

Export CINESSD Data to Computer USB 3.0 Interface USB Cable Included

Records in CinemaDNG and Apple ProRes Supports 5280 x 2970 Max Resolution Write Speeds up to 4.2 Gbps NVMe Logical Device Interface

Records in CinemaDNG and Apple ProRes Supports 4096 x 2160 Max Resolution NVMe Logical Device Interface Four PCI Express Port

The DJI Focus Handwheel 2 Cendence Remote Controller Stand can mount the DJI Focus Handwheel 2, DJI Focus Handwheel and DJI Focus. By allowing the ...

Holds Phantom-Series Quad & Accessories Holds Remote Controller Holds 3 Flight Batteries Holds 12 Propellers

Reduced Propeller Noise Up to 4 db For Phantom 4 Pro or Pro+ V2.0

For DJI Phantom 4 Pro/Pro+ V2.0 Built-In 5.5" Full HD 1080p Display OcuSync HD Transmission Compatible Automatic Switching to Fastest Signal

2.4 GHz and 5.8 GHz Option Mobile Device Holder Up to 6.7"

Up to 30 Minutes of Flight Time Intelligent Communication Calculates Remaining Flight Time Advanced Minimum Capacity Warning