DJI Mavic 3 Pro Cine Premium Combo
Product Description:
Filmmakers gain greater creative control with the DJI Mavic 3 Pro Cine Drone. This top-of-the-line drone introduces a third lens: a 70mm f/2.8 medium telephoto, offering more versatility in how much of a subject and its environment you can capture. It retains the impressive 24mm Hasselblad wide-angle lens with 5.1K resolution, and the telephoto lens has been upgraded to a 166mm f/3.4 with 60 FPS for improved light sensitivity and smoother footage. This advanced tri-camera setup is complemented by Mavic 3 features like O3+ long-range transmission, up to 43 minutes of flight time, and omnidirectional sensing with APAS 5.0, making it user-friendly even for novice pilots.
In the Box:
DJI Mavic 3 Pro Cine Drone
RC Pro Remote
Pair of Control Sticks
3 x Intelligent Flight Battery
6 x Pair of Low-Noise Propellers
100W USB-C Power Adapter
100W USB-C Power Adapter AC Power Cable
100W Battery Charging Hub
Storage Cover
ND Filter Set (ND8, ND16, ND32, and ND64)
2 x USB-C Cable
10 Gb/s Lightspeed Data Cable
Shoulder Bag
Limited 1-Year Manufacturer Warranty (Excluding Propellers)
Limited 1-Year Manufacturer Warranty (1-Year and Less Than 200 Charge Cycles (Battery))
Let's Answer Some Questions
DJI Mavic 3 is DJI’s latest flagship consumer drone. Compared with Mavic 2, Mavic 3 has substantially upgraded camera performance, integrating a 4/3 CMOS Hasselblad camera and a lightweight 24mm equivalent tele camera. Mavic 3 is capable of capturing 5.1K/50fps and 4K/120fps videos, and Mavic 3 Cine even supports Apple ProRes 422 HQ encoding, offering higher image quality and greater flexibility during post-processing. In addition to the camera system, Mavic 3 also delivers a comprehensively upgraded flight experience. Flight time has been extended to 46 minutes, and the new O3+ extends video transmission range to a maximum distance of 15 km. Obstacle sensing has been developed into a truly omnidirectional system, with a more powerful APAS 5.0 and Advanced RTH to give users greater peace of mind during flight.
DJI Mavic 3 features a built-in gimbal lock to prevent the 3-axis gimbal and camera from shaking, adding an additional layer of safety during transportation and storage. Precautions for use:<br>1. The normal operating temperature of the gimbal lock is -10° to 40° C (14 to 104° F). If temperatures are outside of this range, it may fail to lock or unlock properly. You will be prompted by the DJI Fly app to use it within the temperature range. For emergency use in special situations, you can manually twist the three axes without damaging the gimbal itself, but this measure is not recommended.<br>2. The built-in gimbal lock may become unlocked due to external impact. In this case, power on the aircraft and then power off to lock again.<br>3. After the gimbal is locked, vibrations in each axis may occur.
Use the DJI 10Gbps Lightspeed Data Cable in the box to connect the aircraft to your computer via the USB-C port. Make sure the write speed of your storage device is greater than 700MB/s. Other data cables are not recommended since they may take longer to transfer files as high-speed transmission may not be supported.
The tele camera is available only when using Explore mode. Once Explore mode is enabled and the camera zoom exceeds 7x, Mavic 3 will switch to the tele camera automatically.
The flight time was measured in a controlled test environment. Specific test conditions are as follows: No wind, at sea level, constant flight speed of 32.4 kph, APAS off, AirSense off, camera parameters set to 1080p/24fps, video mode off, and flying from 100% battery to 0% battery. Results may vary depending on environment, usage scenario, and firmware version.
DJI Mavic 3 can detect obstacles in all directions with extreme precision. Multiple sensing cameras with a wider range of detection help Mavic 3 respond to obstacles earlier. In a well-lit environment, Mavic 3 can avoid obstacles faster and more smoothly, capturing stable footage safely even when flying laterally or backward.